User Tools

Site Tools


Sidebar

Eventsupport

Sponsors

Interested in supporting an Open Source Camp? Get in touch: unfuck[at]unfuck[dot]eu

Predecessors

$RANDOM

archive:2008:workshop

Workshop

Anleitungen wie baue ich ein TVbGone oder eine Brainmachine aus einem miniPOV board. http://www.tvbgone.com/cfe_mfaire.php

MiniPOV

Hier sind die eagle files aus dem Workshop bitte beachtet dass es sich um eine modifizierte Version des POV handelt. http://webuser.hs-furtwangen.de/~stegk/minipov3_mw.tar

schematic and board (note: the board is the original one, R10 and R11 are rotated 90 degrees - and there's also the addition capacitor missing)

Ansonsten nach Anleitung vorgehen: http://www.ladyada.net/make/minipov3/solder.html

Es gibt noch ein paar schoene Hacks wenn man fertig ist … http://www.ladyada.net/rant/category/minipov/

und hier für die die sich Fragen was das mit dem Sensor auf sich hat. http://www.ladyada.net/forums/viewtopic.php?t=3786&highlight=sensor

TVBGONE

Links

For the firmware source code for North America, please go to TV-B-Gone NA firmware.http://www.tvbgone.com/mfaire/tvbgone/tvbgone_na.c
For the database of North American TV POWER codes, please go to TV-B-Gone NA POWER codes. http://www.tvbgone.com/mfaire/tvbgone/codes_na.zip
For the firmware source code for Europe, please go to TV-B-Gone EU firmware. http://www.tvbgone.com/mfaire/tvbgone/tvbgone_eu.c
For the database of European TV POWER codes, please go to TV-B-Gone EU POWER codes. http://www.tvbgone.com/mfaire/tvbgone/codes_eu.zip
For the makefile for both NA and EU firmware, please go to makefile. http://www.tvbgone.com/mfaire/tvbgone/makefile
For the schematic, please go to TV-B-Gone schematic http://www.tvbgone.com/mfaire/tvbgone/tvbgone_schem.pdf

Durchkontaktierung:

  • beim n von Mini ganz bei den 4 Pads ganz rechts
  • beim IC an Pin 6
  • bei RS232 an pin 7 und 8

Fehler

Ich bekomm momentan noch folgenden Fehler (Spyk)

sudo make program-tvbgone_eu

Compiling: tvbgone_eu.c
avr-gcc -c -I. -g -Os                    -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -DF_CPU=8000000     -Wa,-adhlns=tvbgone_eu.lst  -mmcu=attiny2313 -std=gnu99 tvbgone_eu.c -o tvbgone_eu.o

Linking: tvbgone_eu.elf
avr-gcc -I. -g -Os                       -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -DF_CPU=8000000     -Wa,-adhlns=tvbgone_eu.o  -mmcu=attiny2313 -std=gnu99 tvbgone_eu.o --output tvbgone_eu.elf -Wl,-Map=.map,--cref

Creating load file for Flash: tvbgone_eu.hex
avr-objcopy -O ihex              -R .eeprom tvbgone_eu.elf tvbgone_eu.hex
avrdude -p attiny2313 -P /dev/ttyUSB0    -c dasa -U flash:w:tvbgone_eu.hex

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.59s

avrdude: Device signature = 0x1e910a
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "tvbgone_eu.hex"
avrdude: input file tvbgone_eu.hex auto detected as Intel Hex
avrdude: ERROR: address 0x0810 out of range at line 129 of tvbgone_eu.hex
avrdude: write to file 'tvbgone_eu.hex' failed

avrdude: safemode: Fuses OK

avrdude done.  Thank you.

make: *** [program-tvbgone_eu] Error 1
rm tvbgone_eu.o tvbgone_eu.elf

funktionierende Firmware und makefile

http://www.ladyada.net/forums/viewtopic.php?t=5661&sid=d975e3f76823a8bcf9f8710e1e14685e

BrainMachine

archive/2008/workshop.txt · Last modified: 2008/07/12 01:50 by 141.28.230.249